Monday, April 29, 2013

3PAR remote copy setup

Remote copy status and troubleshooting


before starting remote copy steps:
Setup remotecopy ip interface and licenses

DataCenter1 remote copy port and IP
2:6:1 - 19.162.27.7
3:6:1 - 19.162.27.8

3par2 cli% showport -rcip
N:S:P State ---HwAddr---     IPAddr         Netmask     Gateway  MTU  Rate Duplex AutoNeg
2:6:1 ready 0002AC69249B 19.162.27.7 255.255.255.240 19.162.27.14 1500 1Gbps   Full     Yes
3:6:1 ready 0002AC6A2867 19.162.27.8 255.255.255.240 19.162.27.14 1500 1Gbps   Full     Yes


DataCenter2 remote copy port and IP
2:6:1 - 19.220.33.145
3:6:1 - 19.220.33.146

3par1 cli% showport -rcip
N:S:P   State ---HwAddr---        IPAddr         Netmask       Gateway  MTU  Rate Duplex AutoNeg
0:6:1 offline 0002AC5410C7             -               -             -    -   n/a    n/a     n/a
1:6:1 offline 0002AC540DFC             -               -             -    -   n/a    n/a     n/a
2:6:1   ready 0002AC540CE6 19.220.33.145 255.255.255.240 19.220.33.158 1500 1Gbps   Full     Yes
3:6:1   ready 0002AC540C23 19.220.33.146 255.255.255.240 19.220.33.158 1500 
1Gbps   Full     Yes

F400 ports:



T800 ports:


7 steps to setup 3PAR remote copy

Step #1. Starting remotecopy
Step #2. Setting up copy target
Step #3. Checking the links
Step #4. Creating Volume Groups for Synchronous Long Distance Remote Copy
Step #5. Add luns to the remote volume group
Step #6. Status
Step #7. Start replication


Please review 3PAR Remote Copy Software User's Guide 3.1.2 under attachment for more details.

Step #1. Starting remotecopy
Starting rcopy on source
3par1 cli% startrcopy

Starting rcopy on target
3par2 cli% startrcopy


Step #2. Setting up copy target
Setting Up the Primary System
creatercopytarget IP : :

3par1 cli% creatercopytarget 3par2 IP 2:6:1:19.220.33.145 3:6:1:19.220.33.146

Setting Up the Backup Systems
creatercopytarget IP : :

3par2 cli% creatercopytarget 3par1 IP 2:6:1:19.162.27.7 3:6:1:19.162.27.8


Step #3. Checking the links
Checking the Links between Systems
3par1 cli% showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name; ID Type Status Options Policy
3par2 1 IP; ready; mirror_config
Link Information
Target Node Address Status Options
3par2 2:6:1 19.220.33.145 Up
3par2 3:6:1 19.220.33.146 Up
receive 2:6:1 receive Up
receive 3:6:1 receive Up

3par2 cli% showrcopyRemote Copy System Information
Status: Started, Normal
Target Information
Name               ID Type Status Options Policy
3par1 1  IP   ready          mirror_config


Link Information
Target             Node  Address    Status Options
3par1 2:6:1 19.162.27.7 Up
3par1 3:6:1 19.162.27.8 Up
receive            2:6:1 receive    Up
receive            3:6:1 receive    Up


Step #4. Creating Volume Groups for Synchronous Long Distance Remote Copy
creatercopygroup :
automatic synchronization.sync command

3par1 cli% creatercopygroup group-remotecopy1 3par2:sync
3par1 cli% creatercopygroup group-bcom-nearline 3par2:periodicsync| periodic
(for synchrouns and async mode)
(Optional).

If you are creating a volume group that uses periodic modeperiod commands
setrcopygroup period s|m|h|d
or
setrcopygroup period s|m|h|d -pat setrcopygroup period 1h 3par2 group-remotecopy1
setrcopygroup period 1h 3par2 -pat  

Auto recover setting:
setrcopygroup pol auto_recover
setrcopygroup pol auto_recover -pat


Step #5. Add luns to the remote volume group
On the source, add the pre-existing virtual volume(s) to the volume group
admitrcopyvv 
admitrcopyvv -pat
admitrcopyvv VV-NL-RCOPYTEST4-R5 group-remotecopy1 3par2:VV-NL-RCOPYTEST1-R5
admitrcopyvv -pat VV-NL-RCOPYTEST1-R5 group-remotecopy1 3par2:VV-NL-RCOPYTEST1-R5 
3par1 cli% admitrcopyvv VV-NL-RCOPYTEST4-R5 group-remotecopy1 3par2:VV-NL-RCOPYTEST1-R5
3par1 cli% admitrcopyvv VV-NL-RCOPYTEST5-R5 group-remotecopy1 3par2:VV-NL-RCOPYTEST2-R5
3par1 cli% admitrcopyvv VV-NL-RCOPYTEST6-R5 group-remotecopy1 3par2:VV-NL-RCOPYTEST3-R5 


Step #6. Status
3par1 cli% showrcopy

Remote Copy System Information
Status: Started, Normal
Target Information
Name   ID Type Status Options Policy
3par2 1  IP   ready          mirror_config

Link Information
Target  Node  Address       Status Options
3par2  2:6:1 19.220.33.145 Up
3par2  3:6:1 19.220.33.146 Up
receive 2:6:1 receive       Up
receive 3:6:1 receive       Up

Group Information
Name              Target     Status   Role       Mode     Options
group-remotecopy1 3par2     New      Primary    Sync
  LocalVV             ID   RemoteVV            ID   SyncStatus    LastSyncTime
  VV-NL-RCOPYTEST4-R5 29   VV-NL-RCOPYTEST1-R5 125  New           NA
  VV-NL-RCOPYTEST5-R5 30   VV-NL-RCOPYTEST2-R5 167  New           NA
  VV-NL-RCOPYTEST6-R5 31   VV-NL-RCOPYTEST3-R5 168  New           NA 


3par1 cli% showrcopy

Remote Copy System Information
Status: Started, Normal
Target Information
Name   ID Type Status Options Policy
3par2 1  IP   ready          mirror_config

Link Information
Target  Node  Address       Status Options
3par2  2:6:1 19.220.33.145 Up
3par2  3:6:1 19.220.33.146 Up
receive 2:6:1 receive       Up
receive 3:6:1 receive       Up

Group Information
Name              Target     Status   Role       Mode     Options
group-remotecopy1 3par2     Started  Primary    Sync
  LocalVV             ID   RemoteVV            ID   SyncStatus    LastSyncTime
  VV-NL-RCOPYTEST4-R5 29   VV-NL-RCOPYTEST1-R5 125  Syncing (0%)  NA
  VV-NL-RCOPYTEST5-R5 30   VV-NL-RCOPYTEST2-R5 167  Syncing (0%)  NA
  VV-NL-RCOPYTEST6-R5 31   VV-NL-RCOPYTEST3-R5 168  Syncing (0%)  NA


3par1 cli% showtask
  Id Type             Name                Status Phase   Step ----StartTime------ -FinishTime- -Priority-
9404 remote_copy_sync VV-NL-RCOPYTEST6-R5 active   2/3 0/1024 2012-09-27 19:24:15 EDT -            n/a
9405 remote_copy_sync VV-NL-RCOPYTEST5-R5 active   2/3 0/1024 2012-09-27 19:24:15 EDT -            n/a
9406 remote_copy_sync VV-NL-RCOPYTEST4-R5 active   2/3 0/1024 2012-09-27 19:24:15 EDT -            n/a 


3par1 cli% showtask
  Id Type             Name                Status Phase Step ----StartTime---- ---FinishTime------ -Priority-
9404 remote_copy_sync VV-NL-RCOPYTEST6-R5 done     --  -- 2012-09-27 19:24:15 EDT 2012-09-27 19:27:37 EDT n/a
9405 remote_copy_sync VV-NL-RCOPYTEST5-R5 done     --  -- 2012-09-27 19:24:15 EDT 2012-09-27 19:27:43 EDT n/a
9406 remote_copy_sync VV-NL-RCOPYTEST4-R5 done     --  -- 2012-09-27 19:24:15 EDT 2012-09-27 19:27:43 EDT n/a


Step #7. Start replication
Starting Initial Replication: Copying Data Directly from Primary Volume Groups
startrcopygroup 
startrcopygroup group-remotecopy1